Server Php For Mac Os X

  1. Php Server Mac Os X
  2. Server Php For Mac Os X 10.13
  3. Download Php For Mac
  4. Server Php For Mac Os X64
  5. Php Web Server Mac

Install Apache for Mac OS X. Mac OS is ultimately built on Unix so its very easy to install any Unix supporting softwares. Even better part is that Mac OS X comes with apache web server and we just need to start it and make some changes to setup our development environment. We will start apache server with root user to avoid any permission issues. So, by default Mac OsX has PHP 5.5.24 with xDebug 2.2.3 and our php.ini is located at /usr/bin/php. How to update PHP on Mac OsX As we want to update the built-in version of PHP of our Mac OsX, at this point maybe its better to think at a more valuable solution. The -DBIND8COMPAT=1 gets you over a problem in the DNS files because MacOS X has definitions for Bind9 and PHP expects Bind8 definitions.DEAPI is needed if you build it for Apache 1.3.31.O3 enables the gcc optimizer.

Each Mac has a built-in Apache server that runs a built-in PHP.

MAMP is a Mac utility that helps users install Apache, Nginx, PHP and MySQL on their machine and therefore have a personal web server. The name of the program is an acronym for Macintosh, Apache, MySQL and PHP. Mac OS X comes with an Apache server and PHP installed by default, but they lack a great deal of the useful tools you will be using and they require you to be comfortable using Terminal which many new developers can find cumbersome. Databridge V2 with MySQLi support IS.

To upgrade it you need less than 10 minutes once you have understood all the steps needed.

The same applies also to install the last PHP 7.1 version: you only need to change the required version of PHP (see below).

Exploring the LAMP server of a Mac

To understand the built-in PHP of your Mac the first thing you should do is open your terminal and type in:

This is the PHP version installed in your Mac.

But, from where is it executed?

And the php.ini?

So, by default Mac OsX has PHP 5.5.24 with xDebug 2.2.3 and our php.ini is located at /usr/bin/php.

How to update PHP on Mac OsX

As we want to update the built-in version of PHP of our Mac OsX, at this point maybe its better to think at a more valuable solution.

Update PHP… go to php.net/downloads.php, download the latest version of PHP, unzip, compile, configure… Mmm, there is a better solution for sure!

And in fact, those good boys at Liip have thought that there should be a better solution… And they built it!

So, in your Terminal, type (use 7.1 if you want to install the last PHP 7.1 version!):

You have just downloaded the best PHP latest version you can find ever.

Now, let’s configure it: it needs less then 5 minutes!

WARNING: If you receive an error like, then you need to stop the built-in Apache instance and reinstall it from Homebrew: it seems the Apache version shipped with MacOS causes some troubles that prevent the server to starting.
Here all the information you need to disable the built-in version of Apache in MacOS and install a fresh new one with Homebrew.

Mac

How to configure your updated version of Mac OsX built-in PHP

The package you have just downloaded is a custom version of PHP built by Liip and it provides a lot more functionalities and useful PHP extension than the original Mac OsX built-in PHP, so you will save a lot of time when you’ll install and update them (think at Intl extension or xDebug, for example).

Once downloaded, the Liip’s PHP moves all the files into /usr/local/php5-5.6.11-20150710-223902/bin and makes a symlink of this folder called php5. In this way, when you’ll update PHP, Apache will automatically load the new PHP version (see more about this in a moment). Really smart!

If you type in Terminal again which php you’ll get the same result as before. This is because we have to tell our Mac OsX to load PHP from the new location.

To do this we will create a .bash_profile in our user directory:

This will open VIM that will create the new file (if it is already present, type the letter a to enter the edit mode).

Into the .bash_file write the line export PATH=/usr/local/php5/bin:$PATH, then press Esc and type SHIFT + Zfor two times (a shortcut to save and close the file).

Then load again the .bash_profile file and restart Apache:

You have updated your Mac OsX built-in PHP.

On the Liip’s PHP Mac OsX home page you will find a lot of useful information about your new PHP.

Server Php For Mac Os X

The next step you should do is open the php.ini located at /usr/local/php5/lib/ and set it the right way.

And, once you have configure your php.ini, maybe you want to configure your Mac Osx built-in Apache or want to install MySQL in your Mac (as it is not shipped by default).

Remember to “Make. Ideas. Happen.”.

I wish you flocking users, see you soon!

Php Server Mac Os X

How to install and configure Apache, MySQL and PHP on Mac OS X 10.7 Lion and OS X 10.6 Snow Leopard.

OSX 10.8 Mountain Lion VersionOSX 10.9 Mavericks Version
Apache and PHP already come preloaded in OS X 10.7 Lion and 10.6 Snow Leopard, the versions on 10.7 Lion are PHP 5.3.6 and Apache 2.2.20, these 2 pieces of Open Source software are part of the “AMP” stack with MySQL the missing third component.

Their are other options for Mac users to install an AMP stack using prebuilt point and click downloads including the following, MAMP, DAMP, XAMPP and BitNami – these installations use separate binaries outside of the regular OS X software so no conflict occurs and it makes it easier to delete the stacks without affecting other parts of the operating system.

However sometimes you need to configure these with different port numbers and this can lead to issues and there is the question of vendor support and application versions.

This tutorial bypasses the 3rd party AMP stacks and uses the native installed components with the exception of MySQL which is a separate install, unless you have OS X Server, which then MySQL comes preloaded in 10.6 but not 10.7 which has dumped MySQL in favour of PostgreSQL instead – you can still install MySQL on 10.7 Server with the instructions below.

To get Apache, MySQL and PHP running natively on OSX is quite easy and straightforward – this guide should have you up and running in no time.

This guide uses the command line to achieve some text editing of various configuration files, however If you aren’t comfortable in the Terminal you can do this in a graphical mode, download a free text editor utility call TextWrangler, launch it, when you come to edit one of the configuration files, open file, you have to click on “show hidden items” at the bottom of the open dialog box to see all of the system files. But you will still need to use the terminal for some of the commands which don’t involve editing files.

PHP

You can verify your version of PHP by launching the Terminal application, as found in the Utilities folder: /Applications/Utilities/Terminal

To find the PHP version, type at the prompt:

And the version is displayed:

To find the Apache version, type at the prompt:

And the version is displayed:

So far so good, however by default PHP is not enabled and has to have its module loaded you need to make a simple edit in the Apache configuration file “httpd.conf” file. This is filed in /etc/apache2/httpd.conf, get there in the terminal by typing:

Then in the terminal you need to use a text editor either “vi” or nano” will do, this file also has stricter permissions so the “sudo” command needs to be used to edit the file, you will need to be an admin user to have permission to change the file, type:

and then your password.

Once in nano click “control+w” to get a search dialog, type “php” and this will bring you to the php module line:

Uncomment out the hash # to leave it like:

enable php module in nano

Finally type “control + x” to exit and when prompted save the change by typing “y”

MySQL

So now onto the 2nd piece of the puzzle, MySQL. You need to download it from http://dev.mysql.com/downloads/mysql/, chose Mac OS X ver. 10.7 (x86, 64-bit), DMG Archive for an Intel Mac the .dmg file is a point and click installation nice and easy, you can download the tar.gz also for a command line install. The easiest format is the .dmg file as it allows for an installation visually using the GUI.

When downloading you don’t have to sign up, look for » No thanks, just take me to the downloads! – go straight to the download mirrors and download the software from a mirror which is closest to you.

After download open the .dmg and install:

  • mysql5.6.xxx.pkg
  • MySQLstartupitem.pkg
  • MySQLPrefPane

The first is the MySQL software, the 2nd item allows MySQL to start when the Mac is booted and the third is a System Preference that allows start/stop operation and a preference to enable it to start on boot.

Mac
Installation of MySQL

Once the installs are done you can start the mysql server right from the System Preferences which has a new preference in the “Other” category called “MySQL” click start and now it is running.

mysql-system-preference-osx

To find the MySQL version from the terminal, type at the prompt:

This also puts you in to an interactive dialogue with mySQL, type q to exit.

If you got the error:

then mysql was not started, go back to the System Preference and start the database.

After installation, in order to use mysql commands without typing the full path to the commands you need to add the mysql directory to your shell path, this is done in your “.bash_profile” file in your home directory, if you don’t have that file just create it using vi or nano:

Server

and then add:

The first command brings you to your home directory and opens the .bash_profile file or creates a new one if it doesn’t exist, then add in the line above which adds the mysql binary path to commands that you can run. Exit the file with type “control + x” and when prompted save the change by typing “y”. Last thing to do here is to reload the shell for the above to work straight away.

Then test the path by just this time issuing the mysql command without the full path:

You will get the version number again, just type “q” to exit.

The next step is to set up a root password for mysql there are 2 ways to do this one is a regular way and the other provides additional security and disables all other access:

Server Php For Mac Os X 10.13

Regular Way

If you have set the path correctly as above:

!use the single quotes

Then when logging in to mysql:

!NB the no space between -p and the password

Securer Way

Go ahead and just hit enter if this is a new installation and no password currently exists, follow the prompts to set up a new root password – this is a root password just for mysql separate from the root password of OS X you should set this.

You also get asked about:

  • Removing anonymous users?
  • Disallow root login remotely?
  • Remove test database and access to it?
  • Reload privilege tables now?

If this is a new installation you can just answer yes to the questions.

Once the root user and password is set, you have to interact with mysql with the username and password, so access via command line is (note that there is no space between -p and the password):

So thats the two components installed with MySQL having a System Preference option to Start/Stop the database.

Apache

You can start/stop the Web Server Apache in the System Preferences under Sharing and checking the WebSharing box. (Sometimes you may have to toggle it on/off a few times to get it going).

web-sharing-turned-on

This can also be accomplished in the terminal using:

Or restart the web server gracefully using the following:

Once you start your server the there are 2 x document root folders for sharing, one is a top level and the other is user account specific:

and

Download Php For Mac

You should see a “It Works!” or a OSX welcome page depending on which document root you are at, in the finder these locations are found at your Sites folder in your home folder for local user:
/Users/username/Sites/

or at the higher level

/Library/WebServer/Documents/

At the user level in Lion 10.7 you may need to create the personal web sharing folder first, do this through System Preferences > Sharing > Web Sharing and click “Create Personal Website Folder” if it is created this will say ” Open Personal WebSite Folder”

The final thing to verify is that PHP is loaded and ready to go by creating a new text file, has to be plain text (use TextEdit) and typing in:

Save the file as phpinfo.php and save it to the Sites folder in your home directory. Now point your browser to:

You should see the full PHP configuration page. If you just see the code restart the web server to make sure the php module is loaded.

php-module-configuration

That’s it you are ready to develop and share!

The only difference between 10.6 and 10.7 are some incremental version numbers on Apache and MySQL otherwise the process is the same for both operating systems.

Server Php For Mac Os X64

To get up and running with mysql and use phpMyAdmin to manage the mysql database, there is a guide here.

Php Web Server Mac

Then look at installing WordPress, Drupal and Joomla!!!